JConcepts Explains How to Mount Its Crawler Tires
JConcepts has posted a direction and mounting guide for five crawler tires: Rock Block, Megalithics, Ruptures, Tusk and The Hold.
JConcepts has posted a direction and mounting guide for five of their crawler tires: Rock Block, Megalithics, Ruptures, Tusk and The Hold. If you're mounting these, the tread direction is part of the tune.
Here's the short version from their guide:
- Rock Block has an asymmetrical tread, and each tire is marked L or R. Follow those markings for the intended mounting position, then you can experiment with positioning to fine-tune traction. They say to make one change at a time and compare it on the same section of terrain.
- Megalithics have two options: mount with the vertical face of the center bat lugs leading in the direction of travel, or reverse the tire so the stepped face leads.
- Ruptures also have two orientations: larger center lug on the inside track for rough terrain, or on the outside track for looser terrain.
- Tusk: point the leading point of the V-shaped center tread forward, and keep that V pattern consistent on all four tires.
- The Hold: face the intended leading edges of the large horizontal traction bars forward, and keep the same rotational orientation across all four.
JConcepts also notes that 1.9-inch and 2.2-inch crawler tires aren't interchangeable, and the part numbers in the guide cover different variations, so check the listing for wheel fitment, dimensions and inserts before you order.



